Comments on: PXE Boot With Tomato

By: pxe boot and network cleanup « astrozinger

pxe boot and network cleanup « astrozinger — Sun, 18 Dec 2011 03:01:22 +0000

[...] anything was broken until this morning. To fix it, I ended up disabling dhcp, following these instructions and doing the following on my router running [...]

By: mostly tech stuffInstalling OpenBSD 4.8 on a Soekris 5501 - mostly tech stuff

mostly tech stuffInstalling OpenBSD 4.8 on a Soekris 5501 - mostly tech stuff — Sat, 05 Mar 2011 04:56:59 +0000

[...] up PXEBoot on a Tomato based router – http://www.seephar.com/2008/09/pxe-boot-with-tomato/↵OpenBSD 4.8 Installation Guide - http://www.openbsd.org/faq/faq4.html↵ Installing OpenBSD on [...]

By: Nicholas Colyer

Nicholas Colyer — Fri, 15 Oct 2010 19:25:21 +0000

Thanks for this tid bit. Like others I was working on re-configuring my fog server which was previously serving up dhcp on a local catalyst 2900xl and was hacking around with my settings to do PXE over the wireless router (wireless bridges in multiple locations) so that I could expand my imaging capabilities. I’d installed tomato forever ago but when I was putting in my config I had missed a char. When I looked at your config I saw what I missed.

Thanks!

By: Eric Lyna

Eric Lyna — Sun, 28 Mar 2010 17:21:08 +0000

Many thanks… this was the missing piece to the puzzle.

By: gw

gw — Wed, 22 Jul 2009 04:55:42 +0000

Just wanted to say thanks too.

By: phh

phh — Wed, 25 Mar 2009 13:20:08 +0000

Happy to share! FOG (www.fogproject.org) sounds interesting. I will have to check it out.

By: Ken

Ken — Sat, 14 Mar 2009 15:45:12 +0000

Thanks for making this post. This allowed me to quickly setup my Tomato based WRT54GS to forward my PXE requests to my FOG server.

Thanks again,

-Ken